Agfa Azura C 125, Clean-out unit (2015)

Description

Clean-out unit Agfa Azura C 125 (without stacker) Y/M: 2015, counter: only 37.129 plates – max. plate width: 1250 mm – One clean/gum finisher solution that cleans and gums the plate in one operation – Environmentally friendly finisher solution – Plate width, min.-max.:  200-1250 mm (7.9-49.0”) – Plate length:  min. 310 mm (11.8”) – Platesetters: (Agfa) Avalon N8, N16 – Plate speed 60 cm/min (23.6”/min, fixed) – Plate throughput: 37 plates/h (landscape 745 x 605 mm or 26 plates/h (portrait 1030 x 790 mm) – Plate volume: Up to 10,000 m²/year – Brush speed: 150 rpm (fixed) – Dryer temperature: 55°C (131°F, not adjustable) – Noise emission – Max.: – Dimensions (width, length, height): 1820 x 2050 x 1050-1200 mm (71.6 x 81 x 41.3-47.2”) – Uncrated weight: 210 kg (463 lb) – Single phase 1W + N + PE 230V / 6 Amps, 50/60Hz or Single phase 2W + PE 208 – 230V / 6 Amps, 50/60Hz – Power consumption EUR/US: 1350 Watt-hour Condition: very good, cleaned Availability: immediately Agfa’s well-known Azura C95 and C125 are specifically designed for Azura TS plates of up to 95 and 125 cm wide. You either install them on a stand-alone basis, or connect them online with the plate setter (through an L-shaped or straight conveyor). They work perfectly in daylight and at room temperature. These clean-out units can deal with up to 15,000 m² of plates a year, while only needing 20 l of water for each 300 m2 of plates. As the main ingredient of the gum solution, the water circulates in a closed loop, saving on water costs. - Tool-free maintenance - Stand-alone unit or online connection with plate setter - Chemistry-free solution - Swift refill and simple cleaning procedure - Intelligent interface